Huawei OptiX OSN 550 Configuration Manual page 123

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Parameter
Source Slot
Source
Timeslot
Range(e.g.
1,3-6)
Sink Slot
Sink VC4
Sink VC4
Sink Timeslot
Range(e.g.
1,3-6)
Activate
Immediately
Step 3 Configure the pass-through services of NE2.
1.
2.
Issue 02 (2011-06-30)
Value in
This
Example
1-SL4D-2
(SDH-2)
1-5
3-SP3D
VC4-1
-
1-5
Yes
In the NE Explorer, select NE2 and then choose Communication > SDH Service
Configuration from the Function Tree.
Click Create on the lower-right pane to display the Create SDH Service dialog box. Set
the parameters that are required, and then click OK.
Parameter Value in
This
Example
Level VC12
Direction Bidirectiona
l
Source Slot 1-SL4D-2
(SDH-2)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
In this example, the SL4D board in slot 1 is configured as
the source line board. See
different source boards depending on the actual situation.
In this example, the total capacity of the services is 5xE1
according to the plan. The service level is VC12. Hence,
Source Timeslot Range(e.g.1,3-6) is set to 1-5. See
3-12.
In this example, the SP3D board in slot 3 is configured as
the sink tributary board. See
different sink boards depending on the actual situation.
In this example, the services require five VC-12s. Sink
VC4 is set to VC4-1, because a VC-4 contains 63 VC-12s.
-
In this example, the total capacity of the services is 5xE1
according to the plan. The service level is VC12. Hence,
Sink Timeslot Range(e.g.1,3-6) is set to 1-5. See
3-12.
-
Description
In this example, E1 services are configured. Hence,
Level of the E1 services is set to VC12.
In this example, the services are transmitted and received
on the same path. That is, the services are bidirectional
services. Hence, Direction of the services is set to
Bidirectional.
In this example, the SL4D board in slot 1 is configured
as the source line board. See
different source boards depending on the actual
situation.
3 Configuring SDH Services
Figure 3-12. You can select
Figure 3-12. You can select
Figure
Figure 3-12. You can select
Figure
3-41