Huawei OptiX OSN 550 Configuration Manual page 209

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Step 2 Configure the EPL services for users A1 and B1 on NE2.
1.
2.
3.
Issue 02 (2011-06-30)
User Paramete
r
Sink
Timeslot
Range(e.g.
1,3-6)
Activate
Immediatel
y
Click . Select NE2 in the Navigation Tree that is displayed. Then, click OK.
In the NE Explorer, select NE2, and then choose Configuration > SDH Service
Configuration from the Function Tree.
Click Create on the lower-right pane to display the Create SDH Service dialog box. Set
the parameters as follows.
Parameter Value in
This
Example
Level VC12
Service Bidirectional
Direction
Source Slot 6-SL4D-1
(SDH-1)
Source VC4-1
VC4
Source 1-15
Timeslot
Range(e.g.
1,3-6)
Sink Slot 6-SL4D-2
(SDH-2)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value in Description
This
Example
6-15 The value range of the sink timeslots can be
the same as or different from the value
range of the source timeslots. The number
of source timeslots must be, however, the
same as the number of sink timeslots. For
example, if the source timeslots are 10
VC-12s, the sink timeslots must be 10
VC-12s.
Yes -
Description
The SDH service of NE1, which passes through NE2, is
at the VC-12 level.
As shown in Figure 4-25, the SDH service from NE1 to
NE2 is a bidirectional service.
As shown in Figure 4-25, the service signals are
transmitted from 6-SL4D-1(SDH-1) to 6-SL4D-2
(SDH-2). In this example, Source Slot is set to 6-SL4D-1
(SDH-1).
VC4-1 is allocated to the service from NE1 to NE2.
The service between user A1 and user B1 uses timeslots
1-15.
As shown in Figure 4-25, the service signals are
transmitted from 6-SL4D-1(SDH-1) to 6-SL4D-2
(SDH-2). In this example, Sink Slot is set to 6-SL4D-2
(SDH-2).
4 Configuring Ethernet Services
4-55