Huawei OptiX OSN 550 Configuration Manual page 196

4 Configuring Ethernet Services
Step 2 Configure the pass-through services of user A1 and user B1 on NE2.
1.
2.
3.
4-42
User Paramete
r
Sink VC4
Sink
Timeslot
Range(e.g.
1,3-6)
Activate
Immediatel
y
Click . Select NE2 in the Navigation Tree that is displayed. Then, click OK.
In the NE Explorer, select NE2 and then choose Configuration > SDH Service
Configuration from the Function Tree.
Click Create on the lower-right pane to display the Create SDH Service dialog box. Set
the parameters as follows.
Parameter Value in
This
Example
Level VC12
Service Bidirectional
Direction
Source Slot 5-SL4D-1
(SDH-1)
Source VC4-1
VC4
Source 1-15
Timeslot
Range(e.g.
1,3-6)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Value in Description
This
Example
VC4-1 In this example, VC4-1 is specified as the
VC-4 timeslot of the Ethernet service on the
line board.
6-15 The value range of the sink timeslot can be
the same as or different from the value
range of the source timeslot. The number of
source timeslots must be, however, the
same as the number of sink timeslots. For
example, if the source timeslots are 10
VC-12s, the sink timeslots must be 10
VC-12s.
Yes -
Description
The SDH service of NE1, which passes through NE2, is
at the VC-12 level.
As shown in Figure 4-23, the SDH service from NE1 to
NE2 is a bidirectional service.
As shown in Figure 4-23, the service signals are
transmitted from 5-SL4D-1(SDH-1) to 5-SL4D-2
(SDH-2). In this example, Source Slot is set to 5-SL4D-1
(SDH-1).
VC4-1 is allocated to the service from NE1 to NE2.
The service between user A1 and user B1 uses timeslots
1-15.
System
Configuration Guide
Issue 02 (2011-06-30)