Ne Panel; Browse Alarm; Browse Event - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
NOTE
The rule of verifying an invalid clock tracing relation is as follows: First, verify whether a clock source is in the
SSM protocol mode. In the non-SSM protocol mode, verify the status of a clock source. The status directly
determines whether a clock tracing relation is invalid. In the SSM protocol mode, verify the status of a clock
source. If the status is unavailable, it indicates that the clock tracing relation is invalid. If the status is available,
you also need to verify the S1 byte (clock quality). When you manually cancel settings of the quality of the S1
byte and the quality of the S1 byte is unknown, the clock tracing relation is invalid.

1.2.6.5 NE Panel

The NE Panel displays boards and ports in different colors depending on their current status. In
the U2000, most operations such as equipment configuration, monitoring, and maintenance are
performed in the NE Panel window.
GUI
Double-click an NE on the Main Topology to display the NE Panel.
To add a new board, right-click an idle slot and choose a board type.
NOTE
Click the
Slot Layout.
To select an operation related to an installed board, right-click the installed board and choose it
from the shortcut menu. For example, right-click an AUX board and choose Path View to display
the detailed path information.

1.2.6.6 Browse Alarm

This topic describes the user interface for viewing the current and history alarms, Alarm Logs.
In this user interface, buttons are provided, such as Filter, Synchronize, Refresh, and
Acknowledge, to help you quickly locate the alarm cause.
GUI
l
l
l

1.2.6.7 Browse Event

In the Browse Event window, you can view events at different levels. This window provides
buttons, such as Filter by Template, Filter and Refresh, to help you to quickly locate the alarm
cause.
Issue 02 (2011-06-30)
l Choose the Always On Top for the Slot Layout window to always remain on top.
l When a board occupies multiple slots, the slot ID of the main slot is displayed in boldface, and the slot
ID of the slave slot is grayed out.
l In the NE panel, when you click the processing board that is accompanied by an interface board, the
slot ID of this interface board is displayed in orange.
icon on the toolbar, to view the legends of the boards and ports on the right of the
Choose Fault > Browse Current Alarm from the main menu.
Choose Fault > Browse History Alarm from the main menu.
Choose Fault > Browse Alarm Logs from the main menu.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Getting Started
1-19