Configuring Services On The Sncp Ring With A Non-Protection Chain - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
3.
4.
5.
6.
7.
8.
9.
Step 5 Optional: After configuring SNCP services in an end-to-end manner, you can browse the created
VC4 server trails and VC12 services by choosing Service > SDH Trail > Manage SDH
Trail from the Main Menu and specifying the filter conditions.
Step 6 Check whether the service configuration is correct. For details, see Verifying the Correctness
of the SDH Service Configuration.
Step 7 Enable the performance monitoring function for NEs. For details, see Setting Performance
Monitoring Parameters of an NE.
Step 8 Back up the configuration data of the NEs. For details, see Backing Up the NE Database to the
SCB Board.
----End
Relevant Task
To delete any service that is incorrectly configured, see Deleting SDH Services.
3.9 Configuring Services on the SNCP Ring with a Non-
Protection Chain
To configure the services on the SNCP ring, you can directly configure the working service and
protection service, without first configuring the protection subnet. To configure the services on
the non-protection chain, you can configure the services only after the protection subnet is
created.
3.9.1 Networking Diagram
Issue 02 (2011-06-30)
Double-click the sink NE (NE3) on the right of the Main Topology, and use the same
method to Tributary Port of NE3.
In Create SDH Trail, click the SNCP Setting tab, right-click in the blank pane, and choose
Add from the shortcut menu. In the Add the dual-fed and selective receiving node dialog
box that is displayed, select NE1 as the dual-fed node and NE3 as the selective receiving
node, and then click OK. In the Operation Result dialog box indicating that the operation
succeeded, click Close.
Optional: In the Create SDH Trail window, select Set Route Timeslot. In the dialog box
that is displayed, you can modify the working server trail of VC12 services.
Select Copy after Creation and click Apply. In the Operation Result dialog box
indicating that the operation succeeded, click Close. Then, the Copy dialog box is
displayed.
In Available Timeslots/Port, select the ports from NE1-Slot3-SP3D-2(SDH_TU-2) to
NE3-Slot3-SP3D-5(SDH_TU-5), and click Add.
Click OK. In the Operation Result dialog box indicating that the operation succeeded,
click Close.
Optional: In the Operation Result dialog box indicating that the operation succeeded, you
can also click Browse Trail to query the created VC12 services.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring SDH Services
3-51