List Of Parameters - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
About This Chapter
This section describes all the parameters that are used for configuring and querying the common
boards and functions on the U2000. Each parameter is described in terms of the description,
impact on the system, values, configuration guidelines, and relationship with other parameters.
7.1 Port Attributes (Ethernet Port)
7.2 Maximum Frame Length (Ethernet Port Attribute)
7.3 Non-Autonegotiation Flow Control Mode (Ethernet Port Attribute)
7.4 Autonegotiation Flow Control Mode (Ethernet Port Attribute)
7.5 MAC Loopback (Ethernet Port Attribute)
7.6 PHY Loopback (Ethernet Port Attribute)
7.7 QinQ Type Area
7.8 Loop Detection (Ethernet Port Attribute)
7.9 Loop Port Shutdown (Ethernet Port Attribute)
7.10 Traffic Threshold(Mbit/s)(External Ethernet Port Attribute)
7.11 Broadcast Packet Suppression Threshold (Ethernet Interface Attributes)
7.12 Broadcast Packet Suppression (Ethernet Interface Attributes)
7.13 Zero-Flow Monitor (Ethernet Interface Attributes)
7.14 Port Traffic Threshold Time Window(Min)
7.15 Jumbo Frame Type
7.16 Default VLAN ID (Ethernet Port Attribute)
7.17 VLAN Priority (Ethernet Port Attribute)
7.18 Entry Detection (Ethernet Port Attribute)
7.19 TAG
Issue 02 (2011-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7

List of Parameters

7 List of Parameters
7-1