Huawei OptiX OSN 550 Configuration Manual page 333

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
7.53 Bound CAR (Flow Configuration)
7.54 Bound CoS (Flow Configuration)
7.55 CAR ID (CAR Configuration)
7.56 Enabled/Disabled (CAR Configuration)
7.57 Committed Information Rate (kbit/s) (CAR Configuration)
7.58 Committed Burst Size (kbyte) (CAR Configuration)
7.59 Peak Information Rate (kbit/s) (CAR Configuration)
7.60 Maximum Burst Size (kbyte) (CAR Configuration)
7.61 CoS ID (CoS Configuration)
7.62 CoS Type (CoS Configuration)
7.63 CoS Priority (CoS Configuration)
7.64 Port Priority (Link Aggregation)
7.65 System Priority (Link Aggregation)
7.66 Status (Link Aggregation)
7.67 Load Sharing(Ethernet Link Aggregation)
7.68 Protocol Enabled (Spanning Tree)
7.69 Protocol Type (Spanning Tree Protocol)
7.70 Priority (Bridge Parameters)
7.71 Max Age(s)
7.72 Hello Time(s) (Spanning Tree)
7.73 Forward Delay(s) (Spanning Tree)
7.74 TxHoldCount(per second) (Spanning Tree)
7.75 Root Path Cost
7.76 Hold Count (Spanning Tree)
7.77 Port ID
7.78 Designated Path Cost
7.79 Designated Root Bridge Priority
7.80 Designated Bridge Priority(Spanning Tree)
7.81 Designated Bridge MAC Address (Spanning Tree)
7.82 Edge Port Status (Spanning Tree)
7.83 Point to Point Attributes(External Ethernet Port Attributes)
7.84 Enabling LCAS
7.85 LCAS Mode
Issue 02 (2011-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 List of Parameters
7-3