Bound Car (Flow Configuration) - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Impact on the System
If the Flow Type parameter is set incorrectly, that is, the flow classification method is incorrect,
the (Bound CAR or Bound CoS) parameter may fail to meet the expected result. For the effects
of CAR and CoS, refer to the relevant description.
Values
Value Range
Port Flow, Port+VLAN Flow, Port+SVLAN Flow, Port
+CVLAN+SVLAN Flow
The following table lists the description of each value.
Value
Port Flow
Port+VLAN Flow
Port+SVLAN Flow
Port+CVLAN+SVLAN Flow
Configuration Guidelines
Based on the required QoS and service type, set a proper value for Flow Type.
Relationship with Other Parameters
None.

7.53 Bound CAR (Flow Configuration)

Description
The Bound CAR (Flow Configuration) parameter specifies the method of binding a flow with
a CAR ID and querying the CAR ID bound with the flow. One flow can be bound with one CAR
ID only. The CAR takes effect only after the flow is bound with the CAR.
Issue 02 (2011-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
Port Flow
Description
All the packets entering the specified port are
regarded as one flow.
All the packets that enter the specified port, and
whose Tag VID is consistent with the specified VID,
are regarded as one flow.
All the packets that enter from the specified port, and
whose SVLAN VID is consistent with the specified
VID, are regarded as one flow.
All the packets that enter from the specified port, and
whose SVLAN VID and CVLAN VID are consistent
with the specified VID, are regarded as one flow.
7 List of Parameters
7-47