Huawei OptiX OSN 550 Configuration Manual page 193

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Issue 02 (2011-06-30)
User Parameter
Ser
vice
Dir
ecti
on
Av
aila
ble
Res
our
ces
Av
aila
ble
Ti
mes
lots
User Configurab
le Ports
B1←
→user
B2
Avai Lev
lable el
Bou
nd
Path
s
Ser
vice
Dir
ecti
on
Av
aila
ble
Res
our
ces
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value in Description
This
Example
Bidirection The service between user A1 and user A2 is a
al bidirectional service.
VC4-4 For the resources used by the specific boards,
see 6.2 Requirements for Binding Paths
with VCTRUNKs on Ethernet
VC12-1 to Five VC-12s need to be bound for the service
VC12-5 from user A1 to user A2. In this example, the
first to the fifth VC-12 need to be selected in
sequence.
VCTRUN As shown in
K1 (4- 4-EGT1 board is used by the service between
EGT1) user B1 and user B2.
VC12-xv The service between user B1 and user B2 uses
a 20 Mbit/s bandwidth. Hence, 10 VC-12s
need to be bound.
For the method of computing the bound
timeslots based on the service bandwidth, see
6.3 Ethernet Service Bandwidths Carried
by VCTRUNKs of Ethernet
Bidirection The service between user B1 and user B2 is a
al bidirectional service.
VC4-4 For the resources used by the specific boards,
see 6.2 Requirements for Binding Paths
with VCTRUNKs on Ethernet
4 Configuring Ethernet Services
Boards.
Figure 4-23, VCTRUNK1 of the
Boards.
Boards.
4-39