Broadcast Packet Suppression (Ethernet Interface Attributes); Zero-Flow Monitor (Ethernet Interface Attributes) - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Relationship with Other Parameters
None.
7.12 Broadcast Packet Suppression (Ethernet Interface
Attributes)
Description
The Broadcast Packet Suppression (Ethernet Interface Attributes) parameter specifies
whether to enable the function for a port to suppress the broadcast packets and to control the
traffic of the broadcast data packets that enter the port. If the broadcast packet suppression
function is enabled, and if the broadcast traffic exceeds the specified threshold value, the
broadcast packets that enter the port are discarded.
Impact on the System
If Broadcast Packet Suppression is set to Enabled, the port can effectively suppress the traffic
of the broadcast packets by using the statistic function of the network processor on the board.
Values
Board Name
EFS8
Configuration Guidelines
You can set this parameter according to whether to control the traffic of the broadcast packets.
Relationship with Other Parameters
None.

7.13 Zero-Flow Monitor (Ethernet Interface Attributes)

Description
The Zero-Flow Monitor parameter specifies whether the traffic on a port is monitored.
Impact on the System
After the zero traffic monitoring function is enabled, the port can report the zero traffic alarm
after the state of zero traffic lasts for a certain period. Hence, the user can check whether the
service is interrupted due to the fault on the equipment side.
Issue 02 (2011-06-30)
Value Range
Enabled, Disabled
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 List of Parameters
Default Value
Disabled
7-15