Huawei OptiX OSN 550 Configuration Manual page 266

4 Configuring Ethernet Services
4-112
User Paramete
r
User G1 Level
←→
user G3
Direction
Source Slot 4-EFS8-1
Source
VC4
Source
Timeslot
Range(e.g.
1,3-6)
Sink Slot
Sink VC4
Sink
Timeslot
Range(e.g.
1,3-6)
Activate
Immediatel
y
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Value in Description
This
Example
VC12 The timeslot bound with the service
between user G1 and user G3 is at the
VC-12 level. The service level must be
consistent with the level of the path bound
with the VCTRUNK.
Bidirectiona The service between user G1 and user G3
l is a bidirectional service.
When you create a bidirectional SDH
(SDH-1) service from an Ethernet board to a line
board, it is recommended that you set the
slot of the Ethernet board as the source slot.
VC4-4 The value range of Source VC4 is
consistent with the value range of
Available Resources, which is set for the
paths bound with VCTRUNK2. In the case
of VCTRUNK2, Available Resources is
set to VC4-4.
6-10 The value range of the source timeslots is
consistent with the value range of
Available Timeslot, which is set for the
paths bound with VCTRUNK2. In the case
of VCTRUNK2, the value of Available
Timeslot is from VC12-6 to VC12-10.
6-SL4D-2 When you create a bidirectional SDH
(SDH-2) service from an Ethernet board to a line
board, it is recommended that you set the
slot of the line board as the sink slot.
VC4-1 In this example, VC4-1 is specified as the
VC-4 timeslot of the Ethernet service on the
line board.
1-5 The value range of the sink timeslots can be
the same as or different from the value
range of the source timeslots. The number
of source timeslots must be, however, the
same as the number of sink timeslots. For
example, if the source timeslots are five
VC-12s, the sink timeslots must be five
VC-12s.
Yes -
System
Configuration Guide
Issue 02 (2011-06-30)