Huawei OptiX OSN 550 Configuration Manual page 246

4 Configuring Ethernet Services
3.
4-92
User Paramete
r
Av
aila
ble
Ti
me
slot
s
l Click the Advanced Attributes tab. The parameters in the Advanced Attributes tab
page adopt the default values.
Create a bridge for the EFS8 board on NE1.
l In the NE Explorer, select the EFS8 board, and then choose Configuration > Ethernet
Service > Ethernet LAN Service from the Function Tree.
l Click New.
l Set the parameters in the Create Ethernet LAN Service dialog box that is displayed.
Parameter Value in
This
Example
VB Name VB1
VB Type 802.1d
Bridge SVL/Ingress
Switch Mode Filter
Disable
Bridge SVL
Learning
Mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Value in Description
This
Example
VC12-6 to Five VC-12s need to be bound for the service
VC12-10 between user F1 and user F3. In this example,
the sixth to the tenth VC-12s need to be selected
in sequence.
Description
This parameter is a character string used to describe
the bridge. It is recommended that you set this
parameter to a character string that contains the
information about the detailed application of the
bridge.
The IEEE 802.1d MAC bridge learns and forwards
the packets according to the MAC addresses of the
user packets. The information in the VLAN tags of
the user packets, however, is not considered in the
learning and forwarding process. The IEEE 802.1d
MAC bridge is used when the entire information of
the VLANs used by the client cannot be learned or
when the data between the VLANs of the client need
not be isolated.
When the bridge adopts the SVL learning mode, all
the VLANs share the same MAC address table. That
is, the bridge learns and forwards the packets
according to the MAC addresses of the user packets
only. The information in the VLAN tags of the user
packets, however, is not considered in the learning
and forwarding process.
-
System
Configuration Guide
Issue 02 (2011-06-30)