Load Sharing(Ethernet Link Aggregation) - Huawei OptiX OSN 550 Configuration Manual

7 List of Parameters
Value
In Service
Out of Service
Configuration Guidelines
This parameter is used for query only. No rules are provided for selecting a value.
Relationship with Other Parameters
l
l

7.67 Load Sharing(Ethernet Link Aggregation)

Description
The Load Sharing parameter specifies the load sharing mode of an aggregation group.
Impact on the System
Different load sharing modes have different effects. In load sharing mode, the ports in the
aggregation group can share the service. In load non-sharing mode, only one port in the
aggregation group can carry the service and the other port provides protection.
Values
Value Range
Sharing, Non-Sharing
The following table provides the description of each value.
Value
Sharing
Non-Sharing
7-58
Description
Indicates that the port can carry the service.
Indicates that the port cannot carry the service.
For static link aggregation, the LACP protocol is used. The member port state in the link
aggregation group is decided by these parameters, such as port working mode, port working
rate, port priority, and link aggregation group priority.
For manual link aggregation, the LCAP protocol is not used. The member port state in the
link aggregation group is not related to these parameters, such as port working mode and
port working rate.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Default Value
Sharing
Description
Indicates that the ports in the aggregation group share the
service.
Indicates that the ports in the aggregation group do not share
the service. Only one port in the aggregation group carries the
service.
System
Configuration Guide
Issue 02 (2011-06-30)