Creating Fibers Manually - Huawei OptiX OSN 550 Configuration Manual

2 Creating the Network
Procedure
Step 1 Choose File > Discovery > Fiber from the Main Menu.
Step 2 In the pane on the left, select one or more ports of the NE and click Search. Then, the progress
bar is displayed, indicating the progress of the search.
NOTE
Step 3 A dialog box is displayed, indicating that the operation is successful. Click Close.
Step 4 Select one or more fibers from the Physical Fibers/Cable Link List list and click Create Fiber/
Cable.
NOTE
Step 5 Select one or more conflicting fibers (namely, the fibers of which the Conflict with logical link
(Y/N) parameter is set to Yes in the Misconnected Fibers/Cable list) from the Logical Fibers/
Cable Link List list. Click Delete Fiber/Cable.
----End

2.4.2 Creating Fibers Manually

Before you configure services, you need to create the required fibers. You can create a small
number of fibers manually one after another.
Prerequisite
l
l
Procedure
Step 1 Right-click in the Main Topology and choose New > Link from the shortcut menu. Then, the
Create Link dialog box is displayed.
Step 2 Choose Fiber/Cable > Fiber from the left pane.
Step 3 The parameter Create Ways can be set to Common Ways or Batch Ways. The default value
is Common Ways.
Step 4 Click the button in Source NE. Select the source board and source port in the Select Fiber/
Cable Source dialog box that is displayed.
2-12
l If you select the Do not search the ports with Fibers/Cable created on NMS check box, the system
only searches for the ports that do not have fibers.
l To check whether the created fibers are consistent with the actual fiber connection, deselect the Do not
search the ports with Fibers/Cable created on NMS check box.
l If you select the Do not search the ports with Fibers/Cable created on NMS check box and if the
fibers are created for all the selected ports, a dialog box is displayed indicating that the search domain
is null.
l When one or more fibers are selected from the Physical Fibers/Cable Link List list, the fibers that
conflict with the selected fibers are automatically displayed in the Logical Fibers/Cable Link List
list. If there is any conflicting fiber, refer to Step 5 and delete the conflicting fiber before creating fibers.
l During the fiber creation, if all the selected fibers are in Already created state, the system displays
the message No fiber to create.
You must be an NM user with "NE maintainer" authority or higher.
The required boards must be created on each NE.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Issue 02 (2011-06-30)