Huawei OptiX OSN 550 Configuration Manual page 260

4 Configuring Ethernet Services
4-106
Parame Value in This Example Description
ter
Min. VCTRUNK1: 256
Member
VCTRUNK2: 256
s -
Receive
Directio
n
l Click the Bound Path tab. Click the Configuration button. Set the following in the
Bound Path Configuration dialog box that is displayed. Then, click Apply.
User Paramete
r
User Configura
G1←→ ble Ports
user G2
Av Leve
aila l
ble
Bo
un
d
Pat
hs
Serv
ice
Dire
ction
Avai
lable
Reso
urce
s
Avai
lable
Tim
eslot
s
user G1 Configura
ble Ports
←→
user G3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Sets the min. members - receive direction.
When the LCAS is enabled and the number
of available members is smaller than this
value, an alarm is reported.
Value in Description
This
Example
VCTRUN As shown in
K1 EFS8 board is used by the service between
user G1 and user G2.
VC12-xv The service between user G1 and user G2 uses
a 10 Mbit/s bandwidth. Hence, five VC-12s
need to be bound.
For the method of computing the bound
timeslots based on the service bandwidth, see
6.3 Ethernet Service Bandwidths Carried
by VCTRUNKs of Ethernet
Bidirectio The service between user G1 and user G2 is a
nal Bidirectional service.
VC4-4 For the resources used by other boards, see
Requirements for Binding Paths with
VCTRUNKs on Ethernet
VC12-1 to Five VC-12s need to be bound for user G2. In
VC12-5 this example, the first to the fifth VC-12s need
to be selected in sequence.
VCTRUN As shown in
K2 EFS8 board is used by the service between
user G1 and user G3.
Configuration Guide
Figure 4-33, VCTRUNK1 of the
Boards.
Boards.
Figure 4-33, VCTRUNK2 of the
Issue 02 (2011-06-30)
System
6.2