Huawei OptiX OSN 550 Configuration Manual page 299

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Field
Sink S-VLAN
Activation Status
Operation Type
Issue 02 (2011-06-30)
Value Range
Empty, 1-4095
Default value: Empty
Active, Inactive
The value ranges of the parameters are
different from each other for different
boards and products. You can click the
hyperlink in the description to display
the specific information.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring Ethernet Services
Description
The C-VLAN and
S-VLAN parameter
specifies the two
types of VLAN tags
defined in the QinQ
service and IEEE
802.1ad. C-VLAN
is taken as the client
VLAN tag. S-
VLAN is taken as
the service VLAN
tag. C-VLAN Tag
(C-TAG) indicates
the VLAN tag on
the client side, and
S-VLAN Tag (S-
TAG) indicates the
VLAN tag at the
service layer of the
carrier.
This parameter is
applicable to the
QinQ services.
You can click
C-VLAN and S-
VLAN to display
the detailed
information.
Displays the service
status.
The Operation
Type (EPL
Service) parameter
specifies whether to
add, strip, translate
or transparently
transmit VLAN
labels for service
packets at a port
when Service
Type is set to
EVPL(QinQ).
You can click
Operation Type
(EPL Service)
display the detailed
information.
7.28
7.25
to
4-145