Huawei OptiX OSN 550 Configuration Manual page 262

4 Configuring Ethernet Services
3.
4-108
User Paramete
r
Avai
lable
Tim
eslot
s
User Configura
H1←→ ble Ports
user H3
Av Leve
aila l
ble
Bo
un
d
Pat
hs
Serv
ice
Dire
ction
Avai
lable
Reso
urce
s
Avai
lable
Tim
eslot
s
l Click the Advanced Attributes tab. The parameters in the Advanced Attributes tab
page adopt the default values.
Create a bridge for the EFS8 board on NE1.
l In the NE Explorer, select the EFS8 board, and then choose Configuration > Ethernet
Service > Ethernet LAN Service from the Function Tree.
l Click New.
l Set the required parameters in the Create Ethernet LAN Service dialog box that is
displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Value in Description
This
Example
VC12-11 Ten VC-12s need to be bound for the service
to between user H1 and user H2. In this example,
VC12-20 the eleventh to the twentieth VC-12s need to
be selected in sequence.
VCTRUN As shown in
K4 EFS8 board is used by the service between
user H1 and user H3.
VC12-xv The service between user H1 and user H3 uses
a 20 Mbit/s bandwidth. Hence, 10 VC-12s
need to be bound.
For the method of computing the bound
timeslots based on the service bandwidth, see
6.3 Ethernet Service Bandwidths Carried
by VCTRUNKs of Ethernet
Bidirectio The service between user H1 and user H3 is a
nal Bidirectional service.
VC4-4 For the resources used by other boards, see
Requirements for Binding Paths with
VCTRUNKs on Ethernet
VC12-21 Ten VC-12s need to be bound for the service
to between user H1 and user H3. In this example,
VC12-30 the twenty-first to the thirtieth VC-12s need to
be selected in sequence.
Configuration Guide
Figure 4-33, VCTRUNK4 of the
Boards.
Boards.
Issue 02 (2011-06-30)
System
6.2