Ethernet Service Configuration Parameters; Configuring Ethernet Private Line Services - Huawei OptiX OSN 550 Configuration Manual

4 Configuring Ethernet Services
Field
Level
Service Direction
Bound Path
Bound Path Count
Used Channel
Activation Status
Display in Combination

4.12 Ethernet Service Configuration Parameters

Ethernet services can be classified into Ethernet private line services and Ethernet private
network services. Ethernet private line services include EPL services and EVPL services.
Ethernet private network services include EPLAN services and EVPLAN services.

4.12.1 Configuring Ethernet Private Line Services

This topic describes the parameters, such as operation type, service type, and encapsulation
format of the P port, that are used for configuring Ethernet private line services.
4.12.2 Configuring Ethernet Private Network Services
This section describes the parameters for configuring Ethernet private network services.
4.12.1 Configuring Ethernet Private Line Services
This topic describes the parameters, such as operation type, service type, and encapsulation
format of the P port, that are used for configuring Ethernet private line services.
Table 4-43
4-140
Value Range
For example: VC12-xv
Bidirectional, Uplink,
Downlink
Default value: Bidirectional
For example: VC4-1-VC12
(1-3)
For example: 3
For example: Uplink:VC4-3-
VC3(1-3):3
Downlink:VC4-3-VC3(1-3):
3
Active, Deactive
-
lists the parameters that are used for configuring Ethernet private line services.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Description
Specifies the level of a path
that is bound with the
VCTRUNK.
Specifies the direction of the
Ethernet service.
Specifies the number of the
path to be bound.
Displays the number of
VCTRUNKs to be bound.
Displays the actually used
channel.
Displays whether the path is
active.
If you select Display in
Combination, the bound
paths are displayed in a
centralized manner.
Otherwise, the bound paths
are displayed in a distributed
manner.
Issue 02 (2011-06-30)