Phone - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Configuration Guidelines
l
l
l
OptiX OSN 550 equipment does not support this parameter.
Relationship with Other Parameters
None.

7.104 Phone

Description
The Phone parameter specifies the phone numbers of orderwire addressing calls. An addressing
call refers to a point-to-point call.
Impact on the System
The system operation is not affected.
Values
Valid Values
100-99999999
Configuration Guidelines
l
l
l
NOTE
Relationship with Other Parameters
If the length of an orderwire phone number is set to another value, the orderwire addressing call
number is changed to the default phone number that maps the length.
Issue 02 (2011-06-30)
For orderwire conference calls on each node of the same subnet, the phone number must
be the same.
The length of an orderwire conference call number can be set as required. The value range
is 3-8.
The length of an orderwire conference call number must be consistent with that of the
addressing call number.
The phone numbers of orderwire addressing calls cannot be duplicate within the same
subnet.
The length of an orderwire call number can be set as required. The value range is 3-8.
Within the same orderwire network, the length of orderwire call numbers must be consistent
for each node.
The length of phone numbers used to make orderwire addressing calls must be consistent
with that of conference call numbers.
OptiX OSN 550 equipment only supports Phone 1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
101
7 List of Parameters
7-83