4 Configuring Ethernet Services
Parameter
Port
Enabled/
Disabled
Working Mode
Maximum
Frame Length
Table 4-13 Parameters of internal ports on the Ethernet boards
Parameter
Board
Internal Port
Mapping
Protocol
Bound Path
4.4.3 Configuration Process
The Ethernet transparent transmission boards support only EPL services. The EPL are already
created by default and hence you need not configure the Ethernet transparent transmission boards
on the U2000.
Prerequisite
You must be familiar with
Background Information
By default, EPL service connections from external ports to internal ports are already created for
Ethernet transparent transmission boards. The EPL service connections can be queried on the
U2000, but cannot be created, modified, or deleted on the U2000.
If the Ethernet transparent transmission boards in the actual application scenarios are different
from the boards in this example, you need to learn about the requirements for configuring specific
boards.
l
l
4-36
NE1
PORT1
Enabled
Auto-
Negotiation
1522
NE1
3-EGT1
VCTRUNK1
GFP
VC4-4:VC12-1
-VC12-5
4.3.1 Flow of Configuring EPL
For the EPL services supported by Ethernet transparent transmission boards, see
Service Support Capability of Ethernet
For the VCTRUNK binding requirements of Ethernet transparent transmission boards, see
6.2 Requirements for Binding Paths with VCTRUNKs on Ethernet
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
NE3
PORT1
PORT1
Enabled
Enabled
Auto-
Auto-
Negotiation
Negotiation
1522
1522
NE3
4-EGT1
3-EGT1
VCTRUNK1
VCTRUNK1
GFP
GFP
VC4-4:VC12-1
VC4-4:VC12-1
-VC12-10
-VC12-5
Services.
Boards.
System
Configuration Guide
PORT1
Enabled
Auto-
Negotiation
1522
4-EGT1
VCTRUNK1
GFP
VC4-4:VC12-1
-VC12-10
6.1
Boards.
Issue 02 (2011-06-30)