Huawei OptiX OSN 550 Configuration Manual page 280

4 Configuring Ethernet Services
3.
4-126
User Paramet
er
Av
aila
ble
Ti
me
slot
s
l Click the Advanced Attributes tab. The parameters in the Advanced Attributes tab
page adopt the default values.
Create a bridge for the EFS8 board on NE1.
l In the NE Explorer, select the EFS8 board, and then choose Configuration > Ethernet
Service > Ethernet LAN Service from the Function Tree.
l Click New.
l Set the required parameters in the Create Ethernet LAN Service dialog box that is
displayed.
Parameter Value in
This
Example
Board NE1-4-EFS8 -
VB Name VB1
VB Type 802.1ad
Bridge IVL/Ingress
Switch Mode Filter Enable
Bridge IVL
Learning
Mode
Ingress Filter Enabled
MAC Enabled
Address Self-
Learning
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Value in Description
This
Example
VC12-31 Thirty VC-12s need to be bound for user N. In
to this example, the thirty-first to the sixtieth
VC12-60 VC-12s need to be selected in sequence.
Description
This parameter is a character string used to describe
the bridge. It is recommended that you set this
parameter to a character string that contains the
information about the detailed application of the
bridge.
The IEEE 802.1ad bridge supports data frames with
two layers of VLAN tags. This bridge adopts the
outer S-VLAN tags to isolate different VLANs and
supports only the mounted ports whose attributes are
C-Aware or S-Aware.
This bridge checks the contents of the VLAN tags
that are in the packets and performs Layer 2
switching according to the destination MAC
addresses and the S-VLAN IDs of the packets.
-
-
-
System
Configuration Guide
Issue 02 (2011-06-30)