Non-Autonegotiation Flow Control Mode (Ethernet Port Attribute) - Huawei OptiX OSN 550 Configuration Manual

7 List of Parameters
Relationship with Other Parameters
None.
7.3 Non-Autonegotiation Flow Control Mode (Ethernet Port
Attribute)
Description
The Non-Autonegotiation Flow Control Mode (Ethernet Port Attribute) specifies the flow
control mode adopted when an Ethernet port works in non-auto-negotiation mode.
Impact on the System
The system operation is not affected.
Values
Board Name
EFS8, EGT1
The following table lists the description of each value.
Value
Disable
Enable Symmetric Flow
Control
Send Only
Receive Only
Configuration Guidelines
This parameter is meaningful only when you configure the EPL service. You can select the value
as required.
Relationship with Other Parameters
None.
7-8
OptiX OSN 550 Multi-Service CPE Optical Transmission
Valid Values
Disabled, Enable Symmetric
Flow Control, Send Only,
Receive Only
Description
Indicates that the port disables the flow control function.
Indicates that the port can transmit PAUSE frames and
process the received PAUSE frames.
Indicates that the port sends the PAUSE frame only.
Indicates that the port can only process the received PAUSE
frames.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
System
Configuration Guide
Default Value
Disable
Issue 02 (2011-06-30)