Bound Cos (Flow Configuration) - Huawei OptiX OSN 550 Configuration Manual

7 List of Parameters
Impact on the System
The CAR-based flow rate can take effect only after the flow is bound with the enabled CAR
policy.
Values
Value Range
Created CAR ID
Configuration Guidelines
The created flow can be bound with the created CAR policy only. For this reason, you can select
the value from the created CAR ID.
Relationship with Other Parameters
A flow can be bound with the CAR only after the flow and CAR are created.

7.54 Bound CoS (Flow Configuration)

Description
The Bound CoS (Flow Configuration) parameter specifies the method of binding a flow with
a CoS ID and querying the CoS ID bound with the flow. A flow can be bound with one CoS ID
only. The CoS policy can be used to divide the packet priority after the flow is bound with the
CoS.
Impact on the System
The flow packets can be divided into different priorities based on the CoS rules only after the
flow is bound with the CoS.
Values
Value Range
Created CoS ID
Configuration Guidelines
The created flow can be bound with the created CoS policy only. For this reason, you can select
the value from the created CoS ID.
Relationship with Other Parameters
A flow can be bound with the CoS only after the flow and CoS are created.
7-48
OptiX OSN 550 Multi-Service CPE Optical Transmission
Default Value
-
Default Value
-
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
System
Configuration Guide
Issue 02 (2011-06-30)