Jumbo Frame Type; Default Vlan Id (Ethernet Port Attribute) - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide

7.15 Jumbo Frame Type

Description
Jumbo Frame Type specifies the value of the jumbo frame type on an Ethernet port. The jumbo
frame indicates the oversized Ethernet frame, whose maximum length is 65535 bytes. The
Ethernet service board determines whether the Ethernet frame is a jumbo frame according to the
value of the jumbo frame type.
Impact on the System
The system operation is not affected.
Values
Value Range
0 to 65535
Configuration Guidelines
The value of this parameter must be the same as the value of the accessed jumbo frame type.
Otherwise, the Ethernet board does not consider the frame as a jumbo frame.
Relationship with Other Parameters
The maximum transmission unit (MTU) parameter is used for the Ethernet port. If the length of
Ethernet frames is greater than the length of the jumbo frame, the Ethernet port discards these
Ethernet frames. If the length of Ethernet frames is smaller than the length of the jumbo frame
but is greater than the MTU, the Ethernet port discards the Ethernet frames whose length is
greater than the MTU. If the length of Ethernet frames is smaller than the MTU, the Ethernet
port does not discard the received Ethernet frames.

7.16 Default VLAN ID (Ethernet Port Attribute)

Description
The Default VLAN ID (Ethernet Port Attribute) parameter specifies the default VLAN ID
of a port.
Impact on the System
The system operation is not affected.
Issue 02 (2011-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
34928
7 List of Parameters
7-17