Huawei OptiX OSN 550 Configuration Manual page 281

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
4.
5.
Issue 02 (2011-06-30)
l Click Configure Mount.
l Set the parameters for service mounting in the Service Mount Configuration dialog
box that is displayed.
Attribute Attribute Value
Operation Adding S-VLAN tags based on Port and C-VLAN
Type
VB Port 1
Mount Port PORT1
C-VLAN 10
S-VLAN 100
l Click OK.
l In the Create Ethernet LAN Service dialog box, click OK.
Create a VLAN filtering table.
l Select the created bridge and click the VLAN Filtering tab.
l Click New.
l Create the VLAN filtering table of the VoIP service.
Parameter Value in
This
Example
VLAN ID 100
(e.g.1,3-6)
l In Available Forwarding Ports, select PORT1, VCTRUNK1, and VCTRUNK2. Click
. Then, click Apply.
l Create the VLAN filtering table of the HSI service.
Parameter Value in
This
Example
VLAN ID 200
(e.g.1,3-6)
l In Available Forwarding Ports, select PORT2, VCTRUNK1, and VCTRUNK2. Click
. Then, click OK.
Change the Hub/Spoke attribute of the ports mounted to the bridge.
NOTE
If user M and user N need to communicate with each other, proceed to
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 3
PORT2 VCTRUNK1
20 10
200 100
Description
According to the plan, the S-VLAN ID is 100 for the
VoIP service.
Description
According to the plan, the S-VLAN ID is 200 for the
HSI service.
4 Configuring Ethernet Services
4
VCTRUNK2
20 10 20
200 100 200
Step 1.6.
4-127