Broadcast Packet Suppression Threshold (Ethernet Interface Attributes) - Huawei OptiX OSN 550 Configuration Manual

7 List of Parameters
Values
Board Name
EFS8
Configuration Guidelines
Generally, select the value according to the bandwidth.
Relationship with Other Parameters
None.
7.11 Broadcast Packet Suppression Threshold (Ethernet
Interface Attributes)
Description
The Broadcast Packet Suppression Threshold(Ethernet Interface Attributes) parameter
allocates the specified bandwidth to the broadcast packets. The bandwidth is allocated on the
basis of the traffic proportion at the port. If the bandwidth allocated to the broadcast packets
reaches the specified threshold, the port discards the broadcast data packets that are received.
Impact on the System
l
l
Values
Board Name
EFS8
You can set this parameter according to the percentage of the traffic at the port. The value 10
means that the whole bandwidth is allocated to the port.
Configuration Guidelines
Generally, adopt the default value.
7-14
Valid Values
0-100 (FE), 0-1000
(GE), in step length
of 1
If less bandwidth is allocated to the broadcast packets, some necessary broadcast services
are affected.
If excessive bandwidth is allocated to the broadcast packets, excessive broadcast packets
may enter the network. Consequently, the network running is affected.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Default Value
100 (FE), 1000 (GE)
Value Range
10%-100%
System
Configuration Guide
Unit
Mbit/s
Default Value
30%
Issue 02 (2011-06-30)