Changing The Parameter Values Of The Gateway Ne - Huawei OptiX OSN 550 Configuration Manual

5 Modifying the Configuration Data
Procedure
l
l
----End

5.1.4 Changing the Parameter Values of the Gateway NE

During the network optimization and adjustment, you may need to change the type of the gateway
NE or modify the communication address of the gateway NE.
Prerequisite
You must be an NM user with "NE maintainer" authority or higher.
Precautions
Changing the parameter values of the gateway NE may interrupt the communication.
Procedure
Step 1 Choose Administration > DCN Management from the Main Menu.
Step 2 In the Filter NE window that is displayed, choose the NEs. Click OK.
Step 3 Click the GNE tab. Select the gateway NE whose parameter values need to be changed. Right-
click and choose Modify GNE from the shortcut menu.
Step 4 In the Modify GNE dialog box that is displayed, set Gateway Type.
l
5-4
Delete a single NE.
1. Right-click the NE on the Main Topology and choose Delete from the shortcut menu.
The Confirm dialog box is displayed.
2. Click Yes. The Deletion Result dialog box is displayed.
3. Click Close, The NE icon is deleted from the Main Topology.
Delete NEs in batches.
1. Choose Configuration > NE Configuration Data Management from the Main
Menu. Then, the NE Configuration Data Management window is displayed.
2. In the pane on the left, select multiple NEs and click
Configuration Data Management List pane displays the configuration data of all
the selected NEs.
3. Right-click the NEs to be deleted and then choose Delete from the shortcut menu. The
Delete the NE dialog box is displayed.
4. Click OK to delete the selected NEs.
CAUTION
When Gateway Type is set to IP Gateway, change IP Address.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
. Then, the
Issue 02 (2011-06-30)