Bound Path; Table 4-42 Parameters For Bound Path - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Field
Check Field Length
FCS Calculated Bit
Sequence

4.11.7 Bound Path

This topic describes the parameters, such as available resources, available timeslots, and service
direction, which are used for binding a path with an Ethernet port.
Table 4-42

Table 4-42 Parameters for bound path

Field
Configurable Ports
Available Resources
Available Timeslots
VCTRUNK Port
Issue 02 (2011-06-30)
Value Range
The value ranges of the
parameters are different from
each other for different
boards and products. You can
click the hyperlink in the
description to display the
specific information.
The value ranges of the
parameters are different from
each other for different
boards and products. You can
click the hyperlink in the
description to display the
specific information.
lists the parameters that are used for binding a path.
Value Range
For example: VCTRUNKn
For example: VC4-1
For example: VC12-1
VCTRUNKn
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring Ethernet Services
Description
The Check Field Length
parameter specifies the length
of the CRC field of the
mapping protocol.
You can set this parameter
only when the mapping
protocol is GFP, HDLC, or
LAPS.
You can click 7.23 Check
Field Length to display the
detailed information.
The FCS Calculated Bit
Sequence parameter
specifies the sequence of
storing the bits in the CRC
field of the mapping protocol.
You can set this parameter
only when the mapping
protocol is GFP, HDLC, or
LAPS.
You can click 7.24 FCS
Calculated Bit Sequence
display the detailed
information.
Description
Displays all the available
VCTRUNK ports on the
board.
Displays all the available
VC-4s.
Displays all the available
timeslots.
Displays the number (n) of
the VCTRUNK port.
to
4-139