Changing The Gateway Ne Of A Non-Gateway Ne - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
l
NOTE
Step 5 Click OK. Then, click Close in the Operation Result dialog box indicating that the operation
succeeded.
----End

5.1.5 Changing the Gateway NE of a Non-Gateway NE

When changes occur on the only gateway NE to which a non-gateway NE belongs, you need to
assign this non-gateway NE to belong to another gateway NE. Otherwise, the communication
between this NE and the U2000 fails. If a gateway NE manages more than 50 NEs, it is
recommended that you assign certain NEs to belong to other gateway NEs to prevent the
communication between the U2000 and the NEs from being affected.
Procedure
Step 1 Choose Administration > DCN Management from the Main Menu.
Step 2 Click the NE tab.
Issue 02 (2011-06-30)
When Gateway Type is set to OSI Gateway, change NSAP Address.
l It is recommended that you do not change Port No..
l Ensure that the IP address of the gateway NE is in the same network segment as the IP address of the
U2000. If they are not in the same network segment, set the corresponding network ports so that the
U2000 can log in to the gateway NE.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Modifying the Configuration Data
5-5