Retiming Management; Table 2-7 Parameters Used For Retiming - Huawei OptiX OSN 550 Configuration Manual

2 Creating the Network
Field
Synchronous Source
Data Output Method in
Holdover Mode

2.8.4 Retiming Management

This topic describes the parameters that are used for setting the retiming clock source and the
retiming mode.
Table 2-7

Table 2-7 Parameters used for retiming

Field
Retiming Mode
2-32
Value Range
For example: External Clock
Source1
Clock Source in System
Clock Priority Table
Default value: None
Normal Data Output Mode,
Keep the Latest Data
Default value: Normal Data
Output Mode
lists the parameters that are used for retiming.
Value Range
Normal, Retiming Mode of
Tributary Clock, Retiming
Mode of Cross-Connect
Clock
Default value: Normal
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
For the OptiX OSN equipment,
this parameter can be set to only
Retiming Mode of Tributary
Clock.
System
Configuration Guide
Description
The Synchronous Source
parameter indicates the
synchronous clock source
that is being traced. The
synchronous clock source
here refers to a certain clock
source contained in the
system clock priority table.
You can click 7.125
Synchronous Source to
display the detailed
information.
The Data Output Method in
Holdover Mode parameter is
used to specify whether the
data is output normally or the
latest data is kept when the
NE clock is in the holdover
mode.
You can click 7.128 Data
Output Method in
Holdover Mode to display
the detailed information.
Description
The Retiming Mode
parameter specifies whether
the retiming clock, tributary
clock, or cross-connect
(external) clock is used.
You can click 7.129
Retiming Mode to display
the detailed information.
Issue 02 (2011-06-30)