Huawei OptiX OSN 550 Configuration Manual page 234

4 Configuring Ethernet Services
4-80
l In the NE Explorer, select the EFS8 board, and then choose Configuration > Ethernet
Service > Ethernet Line Service from the Function Tree.
l Click New on the lower-right pane to display the Create Ethernet Line Service
window. Set the following parameters and then click OK. The Operation Result dialog
box is displayed, indicating that the operation is successful. Click Close.
User Parameter
User D1 Service
Type
←→user
D2
Service
Direction
Source Port
Source C-
VLAN (e.g.
1, 3-6)
Sink Port
Sink C-
VLAN (e.g.
1, 3-6)
User E1 Service
Type
←→user
E2
Service
Direction
Source Port
Source C-
VLAN (e.g.
1, 3-6)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Value in Description
This
Example
EPL The service between user D1 and user D2 is a
point-to-point EVPL service.
Bidirection The service between user D1 and user D2 is a
al bidirectional service.
PORT1 When creating the bidirectional Ethernet
service from a PORT to a VCTRUNK, it is
recommended that you use a specific PORT as
the source port. In this example, PORT1 is the
external port used by the service between user
D1 and user D2.
100 According to the plan, the VLAN ID is set to
100 on the transmission network side for
Ethernet service between user D1 and user D2.
VCTRUN When creating the bidirectional Ethernet
K1 service from a PORT to a VCTRUNK, it is
recommended that you use a specific
VCTRUNK as the sink port. In this example,
VCTRUNK1 is the internal port used by the
service between user D1 and user D2.
100 According to the plan, the VLAN ID is set to
100 on the transmission network side for
Ethernet services between user D1 and user D2.
EPL The service between user E1 and E2 is a point-
to-point Ethernet private line service.
Bidirection The service between user E1 and user E2 is a
al bidirectional service.
PORT2 When creating the bidirectional Ethernet
service from a PORT to a VCTRUNK, it is
recommended that you use a specific PORT as
the source port. In this example, PORT2 is the
external port used by the service between user
E1 and user E2.
200 According to the plan, the VLAN ID is set to
200 on the transmission network side for
Ethernet service between user E1 and user E2.
System
Configuration Guide
Issue 02 (2011-06-30)