Table 4-17 Parameters Of The Vc-4 Server Trail Between User A1 And User A2; Table 4-18 Parameters Of The Vc-4 Server Trail Route Between User A1 And User A2 - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
l
l
Procedure
Step 1 Configure the EPL services between user A1 and user A2 in end-to-end mode.
1.
Issue 02 (2011-06-30)
For the EPL services supported by Ethernet switching boards, see
Capability of Ethernet
For the VCTRUNK binding requirements of the Ethernet switching boards, see
Requirements for Binding Paths with VCTRUNKs on Ethernet
Create a VC-4 server trail.
l Choose Service > SDH Trail > Create SDH Trail from the Main Menu and set
parameters for the VC-4 server trail.

Table 4-17 Parameters of the VC-4 server trail between user A1 and user A2

Parameter
Direction
Level
Service Domain
Resource Usage Strategy
Protection Priority Strategy
l Double-click NE1 (source) and NE3 (sink) on the main topology to configure the source
and sink of the VC-4 server trail.
l In the Trail Settings tab, configure Explicit Node and Set Route Timeslot.

Table 4-18 Parameters of the VC-4 server trail route between user A1 and user A2

Parameter
Explicit Node
Set Route Timeslot
Other parameters
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Boards.
Value in This Example
Bidirectional
VC4 Server Trail
SDH&RTN
Protected Resource
Trail Protection First
NE
Timeslot
4 Configuring Ethernet Services
6.1 Service Support
6.2
Boards.
Value in This Example
NE2
NOTE
Right-click and choose
Add from the shortcut
menu. In the Add Explicit
Node dialog box that is
displayed, select NE2.
1
NOTE
Click Set Route Timeslot.
In the Set Route Timeslot
dialog box that is displayed,
set the VC-4 server trail
from NE1 to NE3 to VC4-1.
Default values
4-57