Maintenance Point Type (Ethernet Oam) - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
The third and forth bytes indicate the ID of the maintenance point on the network node. The
maintenance point ID must be unique in the entire network.
Impact on the System
The system operation is not affected.
Values
Valid Values
00-00-0001 to FF-FF-FF00
Configuration Guidelines
The maintenance point ID must be unique in the entire network. Moreover, the U2000 can check
whether the maintenance point ID is duplicate.
Relationship with Other Parameters
None.

7.32 Maintenance Point Type (Ethernet OAM)

Description
The Maintenance Point Type (Ethernet OAM) specifies the maintenance point type defined
in IEEE 802.1ag. MEP stands for Maintenance association End Point, and MIP stands for
Maintenance association Intermediate Point.
Impact on the System
The system operation is not affected.
Values
Valid Values
MEP, MIP
Configuration Guidelines
None.
Relationship with Other Parameters
None.
Issue 02 (2011-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
00-00-0001
Default Value
MEP
7 List of Parameters
7-33