Deleting Eplan Services - Huawei OptiX OSN 550 Configuration Manual

5 Modifying the Configuration Data
Prerequisite
You must be an NM user with "NE operator" authority or higher.
Procedure
Step 1 In the NE Explorer, select an Ethernet board and then choose Configuration > Ethernet
Service > Ethernet Line Service from the Function Tree.
Step 2 Click Query.
Step 3 Select the Ethernet private line service to be deleted and click Delete. Click OK in the
Prompt dialog box that is displayed. Then, a dialog box is displayed, indicating that the operation
is successful, that is, the Ethernet private line service is deleted successfully.
Step 4 Click Query to check whether the Ethernet private line service is deleted.
Step 5 See
service.
----End

5.4.4 Deleting EPLAN Services

EPLAN services need to be deleted when the Ethernet boards that are configured with the
EPLAN services need to be deleted or when the configuration of the EPLAN services is incorrect.
Prerequisite
You must be an NM user with "NE operator" authority or higher.
Context
When the EPLAN services are deleted, the VLAN unicast entries and disabled MAC address
entries are deleted.
Procedure
Step 1 In the NE Explorer, select an Ethernet board, and then choose Configuration > Ethernet
Service > Ethernet LAN Service from the Function Tree.
Step 2 Click Query.
Step 3 Select the EPLAN service to be deleted and click Delete. Click OK in the Prompt dialog box
that is displayed. Then, a dialog box is displayed, indicating that the operation is successful, that
is, the EPLAN service is deleted successfully.
Step 4 Click Query to check whether the EPLAN service is deleted.
Step 5 See
----End
5-12
5.4.2 Deleting SDH Services
CAUTION
5.4.2 Deleting SDH Services
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
to delete the cross-connections of the Ethernet private line
to delete the cross-connections of the EPLAN service.
System
Configuration Guide
Issue 02 (2011-06-30)