External Source Output Threshold - Huawei OptiX OSN 550 Configuration Manual

7 List of Parameters
Values
Value Range
SA4, SA5, SA6, SA7, SA8,
All versions
The following table lists the description of each value.
Value
SA4
SA5
SA6
SA7
SA8
All versions
Configuration Guidelines
None.
Relationship with Other Parameters
This parameter can be set only when the External Clock Output Mode parameter is set to 2
Mbit/s.
Related Information
None.

7.115 External Source Output Threshold

Description
The External Source Output Threshold parameter is used to set the output quality threshold
of the external clock source. When the output quality of the external clock source is inferior to
the threshold, the action specified for 2M phase-locked source failure is invoked to control the
external clock source output.
7-92
OptiX OSN 550 Multi-Service CPE Optical Transmission
Default Value
All versions
Description
Indicates that the S1 byte is transmitted through the SA4
timeslot of the external clock port.
Indicates that the S1 byte is transmitted through the SA5
timeslot of the external clock interface.
Indicates that the S1 byte is transmitted through the SA6
timeslot of the external clock interface.
Indicates that the S1 byte is transmitted through the SA7
timeslot of the external clock interface.
Indicates that the S1 byte is transmitted through the SA8
timeslot of the external clock interface.
Indicates that the S1 byte is transmitted through all timeslots
of the external clock interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
System
Configuration Guide
Issue 02 (2011-06-30)