Setting The Integrated Time - Mitsubishi Electric 700 Series Training Manual

2. Monitor Screens

2.16.1 Setting the Integrated Time

Operation method
(1) Press the menu Time setting .
(2) Input today's date.
(Example) 2003/8/19 INPUT
(3) Set the data for each item, and press the
INPUT key.
If the item does not need to be set, press
the ↓ key and move the cursor.
Note that #8 Cycle time cannot be set, so
the cursor will not move.
(Note 1) The data delimiters are as shown below.
#1 Date
#2 Time to #7 Ext time2
#8 Cycle time
(Note 2) If the Time setting menu or
setting mode will be canceled.
Setting range
Display item
#1 Date
2 Time
3 Power ON
4 Auto oper
5 Auto strt
6 Ext time 1
7 Ext time 2
Item Valid delimiters during setting
1980.1.1 to 2069.12.31
00:00:00 to 23:59:59
00:00:00 to 59999:59:59
2.16 Integrated Time Display
The time setting mode is entered.
The cursor appears at the "#1 Date" position in the
integrated time display.
"2003.08.19" appears at "#1 Date", and the cursor moves to
"#2 Time".
When "#7 External integrated time 2" has been set, the
cursor disappears, and the time setting menu highlight is
turned OFF.
" . " or " / "
" : " or " / "
key is pressed again during the time setting mode, the time
Range
63
Delimiters in display
" . "
" : "
" : "