Qr Code Generation For Mobile Service Application - ABB +N5600 Firmware Instructions

568 Fault tracing

QR Code generation for mobile service application

A QR Code (or a series of QR Codes) can be generated by the drive for display on
the control panel. The QR Code contains drive identification data, information on the
latest events, and values of status and counter parameters. The code can be read
with a mobile device containing the ABB service application, which then sends the
data to ABB for analysis. For more information on the application, contact your local
ABB service representative.
The QR Code can be generated by choosing Menu - Assistants - QR code on the
control panel.