ABB +N5600 Firmware Instructions page 442

442 Parameters
No. Name/Value
Bit Name
0 Reserved
1 Manual trigger
2 Time trigger
3...6 Reserved
7 Acceleration boost
8...9 Reserved
10 Max cleaning supervision
11 Supervision low
12 Supervision high
13 Reserved
14 Manual trig level
15 Invert ref sign
81.11 Manual trigger
source
Not selected
Selected
DI1
DI2
DI3
DI4
DI5
DI6
Description
Description
Cleaning can be requested by the
manual trigger. See parameter
Manual trigger
Cleaning can be requested by the time
trigger. See parameter
trigger.
Enables cleaning acceleration boost.
See parameter
current.
Enables supervision for the maximum
allowed number of cleaning.
Allows low level supervision
automatically interrupt the pump
cleaning procedure.
Allows high level supervision to skip
current cleaning step cycle.
Sets use-style of the manual trigger to
initiate pump cleaning procedure on
source signal LEVEL.
Invert cleaning procedure speed
reference sign for the both steps.
Defines source for the Manual trigger signal necessary to
activate the cleaning operation.
To activate triggering option, set parameter
cleaning option sel to bit 1.
Note: The triggering style can be controlled with parameter
81.02 Pump cleaning option
There are two possible use cases for cleaning manual trigger.
• When bit-14 is set to 0, cleaning function request is
created only on the rising edge of the source signal. Note,
that the trigger signal must remain ON for the cleaning
request.
• When bit-14 is set to 1, cleaning function request is defined
by the source signal level status. If the trigger signal is ON
all the time, then cleaning operation will be performed at
every start.
Manual trigger source is not selected.
Manual trigger source is selected.
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
81.11
source.
81.19 Time
81.35 Acceleration boost
81.02 Pump
sel, bit-14.
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
Def/FbEq16
ESP CW bit
12
0
1
2
3
4
5
6
7