ABB +N5600 Firmware Instructions page 172

172 Parameters
No. Name/Value
06.25 Drive inhibit status
word 2
Bit Name
0 Follower drive
1 Application
2 Aux. power failure 1 = A control unit auxiliary power failure is preventing the drive
3 Encoder feedback 1 = The encoder feedback configuration is preventing the
4 Ref source
parametrization
5...15 Reserved
Notes:
a If bit 1 of
and edge triggering is selected for the active external control location, a fresh rising-edge
start signal is required. See parameters 20.02,
b If bit 1 of
fresh rising-edge start signal is required.
0000h...FFFFh
06.29 MSW bit 10 sel
False
True
Above limit
Other [bit]
06.30 MSW bit 11 sel
False
True
Ext ctrl loc
Other [bit]
06.31 MSW bit 12 sel
False
True
Ext run enable
Other [bit]
Description
Drive inhibit status word 2. This word specifies the source of
the inhibiting condition that is preventing the drive from
starting. After the condition is removed, the start command
must be cycled. See bit-specific notes.
See also parameter
Drive status word 1, bit 1.
This parameter is read-only.
Description
1 = A follower is preventing the master from starting.
1 = The application program is preventing the drive from
starting.
from starting.
drive from starting.
1 = A reference source parametrization conflict is preventing
the drive from starting. See warning
parametrization
06.16 Drive status word 1
06.16 Drive status word 1
Start inhibit status word 2.
Selects a binary source whose status is transmitted as bit 10
of 06.11 Main status
0.
1.
Bit 10 of 06.17 Drive status word 2
Source selection (see
Selects a binary source whose status is transmitted as bit 11
of 06.11 Main status
0.
1.
Bit 11 of 06.01 Main control word
Source selection (see
Selects a binary source whose status is transmitted as bit 12
of 06.11 Main status
0.
1.
Inverted bit 5 of 06.18 Start inhibit status word
169).
Source selection (see
06.18 Start inhibit status
A6DA Reference source
(page 576).
is still set after the removal of the inhibiting condition,
20.07 and 20.19.
is still set after the removal of the inhibiting condition, a
word.
(see page 168).
Terms and abbreviations
word.
(see page 165).
Terms and abbreviations
word.
Terms and abbreviations
Def/FbEq16
-
word, and 06.16
Note
a
b
a
b
1 = 1
Above limit
0
1
2
on page 148). -
Ext ctrl loc
0
1
2
on page 148). -
Ext run
enable
0
1
(see page 2
on page 148). -