Process Pid Set 2 - ABB +N5600 Firmware Instructions

No. Name/Value
DI6
DIO1
DIO2
Other [bit]
40.91 Feedback data
storage
-327.68 ... 327.67
40.92 Setpoint data
storage
-327.68 ... 327.67
41

41 Process PID set 2

41.07 Set 2 PID operation
mode
41.08 Set 2 feedback 1
source
41.09 Set 2 feedback 2
source
41.10 Set 2 feedback
function
41.11 Set 2 feedback filter
time
41.12 Set 2 unit selection
rpm
%
Hz
PID user unit 2
41.14 Set 2 setpoint
scaling
41.15 Set 2 output scaling
41.16 Set 2 setpoint 1
source
Description
Digital input DI6 (10.02 DI delayed
Digital input/output DIO1
Digital input/output DIO2
Source selection (see Terms and abbreviations
Storage parameter for receiving a process feedback value eg.
through the embedded fieldbus interface.
The value can be sent to the drive as Modbus I/O data. Set
the target selection parameter of that particular data
(58.101...58.124) to Feedback data
feedback 1 source (or 40.09 Set 1 feedback 2
Feedback data storage.
Storage parameter for process feedback.
Storage parameter for receiving a process setpoint value eg.
through the embedded fieldbus interface.
The value can be sent to the drive as Modbus I/O data. Set
the target selection parameter of that particular data
(58.101...58.124) to Setpoint data
setpoint 1 source (or 40.17 Set 1 setpoint 2
Setpoint data storage.
Storage parameter for process setpoint.
A second set of parameter values for process PID control.
The selection between this set and first set (parameter group
40 Process PID set 1) is made by parameter
set1/set2 selection.
See also parameters 40.01...40.06, 40.91, 40.92, and the
control chain diagrams on pages
See parameter 40.07 Set 1 PID operation
See parameter 40.08 Set 1 feedback 1
See parameter 40.09 Set 1 feedback 2
See parameter 40.10 Set 1 feedback
See parameter 40.11 Set 1 feedback filter
Defines the unit for parameters
rpm.
%.
Hz.
User-definable unit 2. The name of the unit can be edited on
the control panel by choosing Menu – Settings – Edit texts.
See parameter 40.14 Set 1 setpoint
See parameter 40.15 Set 1 output
See parameter 40.16 Set 1 setpoint 1
status, bit 5).
(11.02 DIO delayed status, bit 0).
(11.02 DIO delayed status, bit 1).
on page 148). -
storage. In 40.08 Set 1
source), select
storage. In 40.16 Set 1
source), select
40.57 PID
658 and 659.
mode.
source.
source.
function.
time.
41.21...41.24 and 41.47.
scaling.
scaling.
source.
Parameters 353
Def/FbEq16
8
11
12
-
100 = 1
-
100 = 1
Off
AI1 scaled
Not selected
In1
0.000 s
%
7
4
3
249
100.00
1500.00;
1800.00
(95.20 b0)
Internal
setpoint