Kick-Start - ABB +N5600 Firmware Instructions



Kick-start

Kick-start function provides sometime to motor to develop starting torque sufficient to
start spinning. The fast acceleration rate settings create risk for the motor to pull out
before it gets to follow the frequency reference. Instead, the function gives current
boost to motor at low speed for a set amount of time sufficient to develop starting
torque and eventually break through the static friction.
The function allows user to set desired speed and current reference for the motor
applied for a defined period of time. After the starting routine is completed, the drive
will automatically transit to accelerate to production speed with additional help of the
Acceleration assistance (if enabled).
Speed reference
75.42 Acceleration
assistance speed
limit
75.52 Kick start
speed reference
75.15 Starting
speed
Motor
current
75.56 Kick start
current ref
75.46 Acceleration
assistance current
Regular current
Settings
Parameter group 75 ESP reference setup
0
0
75.51 Kick start hold time
Kick-start routine
ESP program features 47
Acceleration
assistance
(page 421).
Time
Time