ABB +N5600 Firmware Instructions page 367

No. Name/Value
46.23 At torque hysteresis
0.0 ... 300.0%
46.31 Above speed limit
0.00 ... 30000.00
rpm
46.32 Above frequency
limit
0.00 ... 1000.00 Hz
46.33 Above torque limit
0.0 ... 1600.0%
46.42 Torque decimals
0...2
Description
Defines the "at setpoint" limits for torque control of the drive.
When the absolute difference between reference
Torque reference act 4) and actual torque
torque) is smaller than 46.23 At torque
considered to be "at setpoint". This is indicated by bit 8 of
06.11 Main status word.
Drive at setpoint
(06.11 bit 8 = 1)
Limit for "at setpoint" indication in torque control.
Defines the trigger level for "above limit" indication in speed
control. When actual speed exceeds the limit, bit 10 of
Drive status word 2 is set.
"Above limit" indication trigger level for speed control.
Defines the trigger level for "above limit" indication in
frequency control. When actual frequency exceeds the limit,
bit 10 of 06.17 Drive status word 2
"Above limit" indication trigger level for frequency control.
Defines the trigger level for "above limit" indication in torque
control. When actual torque exceeds the limit, bit 10 of
Drive status word 2 is set.
"Above limit" indication trigger level for torque control.
Defines the number of decimal places of torque-related
parameters.
Number of decimal places of torque parameters.
(26.73
(01.10 Motor
hysteresis, the drive is
01.10 (%)
26.73 + 46.23 (%)
26.73 (%)
26.73 - 46.23 (%)
0 %
is set.
Parameters 367
Def/FbEq16
10.0%
See par.
46.03
1500.00 rpm
06.17
See par.
46.01
50.00 Hz
See par.
46.02
300.0%
06.17
See par.
46.03
1
1 = 1