Diagnostics - ABB +N5600 Firmware Instructions

164 Parameters
No. Name/Value
ACS800 System
ctrl program
05

05 Diagnostics

05.01 On-time counter
0...65535 d
05.02 Run-time counter
0...65535 d
05.04 Fan on-time
counter
0...65535 d
05.11 Inverter
temperature
-40.0 ... 160.0%
05.22 Diagnostic word 3
Bit Name
0...10 Reserved
11 Fan command
12 Fan service
counter
13...15 Reserved
0000h...FFFFh
05.41 Main fan service
counter
0...150%
Description
The bit assignments of parameters
to the ACS800 System control program as follows:
04.21 Fault word 1: 09.01 FAULT WORD 1
04.22 Fault word 2: 09.02 FAULT WORD 2
04.31 Warning word 1: 09.04 ALARM WORD 1
04.32 Warning word 2: 09.05 ALARM WORD 2
Various run-time-type counters and measurements related to
drive maintenance.
All parameters in this group are read-only unless otherwise
noted.
On-time counter. The counter runs when the drive is
powered.
On-time counter.
Motor run-time counter. The counter runs when the inverter
modulates.
Motor run-time counter.
Running time of the drive cooling fan. Can be reset from the
control panel by keeping Reset depressed for over 3
seconds.
Cooling fan run-time counter.
Estimated drive temperature in percent of fault limit. The
actual trip temperature varies according to the type of the
drive.
0.0% = 0 °C (32 °F)
94% approx. = Warning limit
100.0% = Fault limit
Drive temperature in percent.
Diagnostic word 3.
Value
1 = Drive fan is rotating above idle speed
1 = Drive fan service counter has reached its limit
Diagnostic word 3.
Displays the age of the main cooling fan as a percentage of
its estimated lifetime. The estimate is based on the duty,
operating conditions and other operating parameters of the
fan. When the counter reaches 100%, a warning
service counter) is generated.
Can be reset from the control panel by keeping Reset
depressed for over 3 seconds.
Main cooling fan age.
04.21...04.32 correspond
(A8C0 Fan
Def/FbEq16
1
-
1 = 1 d
-
1 = 1 d
-
1 = 1 d
-
1 = 1%
-
1 = 1
-
1 = 1%