ABB +N5600 Firmware Instructions page 18

18 Introduction to the manual
Term/abbre- Definition
viation
Parameter User-adjustable operation instruction to the drive, or signal measured or
calculated by the drive
PID controller Proportional–integral–derivative controller. Drive speed control is based on
PID algorithm.
PLC Programmable logic controller
Power unit Contains the power electronics and power connections of the drive (or inverter
module). The drive control unit is connected to the power unit.
PTC Positive temperature coefficient
PU See
RDCO-0x DDCS communication module
RFG Ramp function generator.
RO Relay output; interface for a digital output signal. Implemented with a relay.
SMC Submersible motor control.
SSI Synchronous serial interface
STO Safe torque off
Supply unit The part of the drive that converts AC to DC. An IGBT supply unit (ISU) is also
capable of feeding regenerative energy back into the supply network.
TTL Transistor-transistor logic
UPS Uninterruptible power supply; power supply equipment with battery to
maintain output voltage during power failure
ZCU Type of control unit used in ACS880 drives (primarily in drive modules, or
inverter/supply units consisting of a single power module). Consists of an I/O
board built into a plastic housing.
Depending on the type of hardware, the control unit may be integrated into or
fitted onto the drive/inverter module, or installed separately.
power unit.