ABB +N5600 Firmware Instructions page 261

No. Name/Value
23.26 Ramp out balancing
enable
Not selected
Selected
DI1
DI2
DI3
DI4
DI5
DI6
DIO1
DIO2
Other [bit]
23.27 Ramp out balancing
ref
-30000.00 ...
30000.00 rpm
Description
Selects the source for enabling/disabling speed reference
ramp balancing.
This function is used to generate a smooth transfer from a
torque- or tension-controlled motor back to being speed-
controlled. The balancing output would be tracking the
present "line" speed of the application and when transfer is
required, the speed reference can then be quickly "seeded" to
the correct line speed. Balancing is also possible in the speed
controller, see parameter
See also parameter 23.27 Ramp out balancing
0 = Disabled
1 = Enabled
0.
1.
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Digital input/output DIO1
Digital input/output DIO2
Source selection (see Terms and abbreviations
Defines the reference for speed ramp balancing. The output
of the ramp generator is forced to this value when balancing
is enabled by parameter
Speed ramp balancing reference.
25.09 Speed ctrl balancing
ref.
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(11.02 DIO delayed status, bit 0).
(11.02 DIO delayed status, bit 1).
on page 148). -
23.26 Ramp out balancing
Parameters 261
Def/FbEq16
Not selected
enable.
0
1
2
3
4
5
6
7
10
11
0.00 rpm
enable.
See par.
46.01