ABB +N5600 Firmware Instructions page 487

No. Name/Value
96.61 User data logger
status word
Bit Name
0 Running
1 Triggered
2 Data
available
3 Configured
4...15 Reserved
0000b...1111b
96.63 User data logger
trigger
Off
On
Other [bit]
96.64 User data logger
start
Off
On
Other [bit]
96.65 Factory data logger
time level
500us
2ms
10ms
96.70 Disable adaptive
program
No
Yes
Description
Provides status information on the user data logger (see page
567).
Description
1 = The user data logger is running. The bit is cleared after the post-trigger
time has passed.
1 = The user data logger has been triggered. The bit is cleared when the
logger is restarted.
1 = The user data logger contains data that can be read. Note that the bit is
not cleared because the data is saved to the memory unit.
1 = The user data logger has been configured. Note that the bit is not
cleared because the configuration data is saved to the memory unit.
User data logger status word.
Triggers, or selects a source that triggers, the user data
logger.
0.
1.
Source selection (see Terms and abbreviations
Starts, or selects a source that starts, the user data logger.
0.
1.
Source selection (see Terms and abbreviations
Selects the sampling interval for the factory data logger (see
page 566).
500 microseconds.
2 milliseconds.
10 milliseconds.
Enables/disables the adaptive program (if present).
See also section Adaptive programming
Adaptive program enabled.
Adaptive program disabled.
Parameters 487
Def/FbEq16
0000b
1 = 1
Off
0
1
on page 148). -
Off
0
1
on page 148). -
500us
500
2000
10000
No
(page 63).
0
1