ABB +N5600 Firmware Instructions page 365

No. Name/Value
46.05 Current scaling
0...30000 A
46.06 Speed ref zero
scaling
0.00 ... 30000.00
rpm
46.07 Frequency ref zero
scaling
0.00 ... 1000.00 Hz
46.11 Filter time motor
speed
0...20000 ms
46.12 Filter time output
frequency
0...20000 ms
46.13 Filter time motor
torque
0...20000 ms
46.14 Filter time power
out
0...20000 ms
Description
Defines the 16-bit scaling of current parameters. The value of
this parameter corresponds to 10000 in fieldbus,
master/follower etc. communication.
Current corresponding to 10000 on fieldbus.
Defines a speed corresponding to a zero reference received
from fieldbus (either the embedded fieldbus interface, or
interface FBA A or FBA B). For example, with a setting of
500, the fieldbus reference range of 0...20000 would
correspond to a speed of 500...[46.01] rpm.
Note: This parameter is effective only with the ABB Drives
communication profile.
Speed corresponding to minimum fieldbus reference.
Defines a frequency corresponding to a zero reference
received from fieldbus (either the embedded fieldbus
interface, or interface FBA A or FBA B). For example, with a
setting of 30, the fieldbus reference range of 0...20000 would
correspond to a speed of 30...[46.02] Hz.
Note: This parameter is effective only with the ABB Drives
communication profile.
Frequency corresponding to minimum fieldbus reference.
Defines a filter time for signals
01.02 Motor speed estimated,
and 01.05 Encoder 2 speed
Motor speed signal filter time.
Defines a filter time for signal
Output frequency signal filter time.
Defines a filter time for signal
Motor torque signal filter time.
Defines a filter time for signal
Output power signal filter time.
01.01 Motor speed used,
01.04 Encoder 1 speed filtered
filtered.
01.06 Output frequency.
01.10 Motor torque.
01.14 Output power.
Parameters 365
Def/FbEq16
10000 A
1 = 1 A
0.00 rpm
1 = 1 rpm
0.00 Hz
10 = 1 Hz
500 ms
1 = 1 ms
500 ms
1 = 1 ms
100 ms
1 = 1 ms
100 ms
1 = 1 ms