ABB +N5600 Firmware Instructions page 438

438 Parameters
No. Name/Value
DIO2
ESP CW bit 9
Other
80.10 U/F Curve enable
Not selected
Selected
DI1
DI2
DI3
DI4
DI5
DI6
DIO1
DIO2
ESP CW bit 10
Other
80.11 Frequency point 1
2.00...600.00 Hz
80.12 Frequency point 2
2.00...600.00 Hz
80.13 Frequency point 3
2.00...600.00 Hz
80.14 Frequency point 4
2.00...600.00 Hz
80.15 Frequency point 5
2.00...600.00 Hz
80.16 Frequency point 6
2.00...600.00 Hz
80.17 Frequency point 7
2.00...600.00 Hz
80.18 Frequency point 8
2.00...600.00 Hz
80.21 Additive voltage 1
-100.00...100.00 %
Description
Digital input/output DIO2
Parameter 74.01 ESP control
enable/disable status of the function.
Source selection (see Terms and abbreviations
Defines the source for the U/F curve enable signal.
When this parameter is enabled, the function will control
motor flux reference based on user settings with parameters
80.11...80.18. The requested change in voltage reference is
internally converted to motor flux reference correction at a
corresponding frequency point. The effect of applied settings
can be monitored through signals
80.81 Flux reference.
For further information, see
U/F curve enable signal is disabled.
U/F curve enable signal is enabled.
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Digital input/output DIO1
Digital input/output DIO2
Parameter 74.01 ESP control
enable/disable status of the function.
Source selection (see Terms and abbreviations
Defines frequency point 1 in the custom user U/F curve.
Frequency point 1.
Defines frequency point 2 in the custom user U/F curve.
Frequency point 2.
Defines frequency point 3 in the custom user U/F curve.
Frequency point 3.
Defines frequency point 4 in the custom user U/F curve.
Frequency point 4.
Defines frequency point 5 in the custom user U/F curve.
Frequency point 5.
Defines frequency point 6 in the custom user U/F curve.
Frequency point 6.
Defines frequency point 7 in the custom user U/F curve.
Frequency point 7.
Defines frequency point 8 in the custom user U/F curve.
Frequency point 8.
Defines voltage additive point 1 in the custom user U/F curve. 0.00
Additive voltage 1.
(11.02 DIO delayed status, bit 1).
word, bit-9 status controls
on page 148). -
80.80 Flux correction
Motor voltage control
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(11.02 DIO delayed status, bit 0).
(11.02 DIO delayed status, bit 1).
word, bit-10 status controls
on page 148). -
Def/FbEq16
9
10
ESP CW bit
10
and
(page 58).
0
1
2
3
4
5
6
7
8
9
10
10.00
10 = 1Hz
20.00
10 = 1Hz
30.00
10 = 1Hz
40.00
10 = 1Hz
45.00
10 = 1Hz
50.00
10 = 1Hz
55.00
10 = 1Hz
60.00
10 = 1Hz
10 = 1%