ABB +N5600 Firmware Instructions page 179

No. Name/Value
06.101 User control word 2
Bit Name
0 User control word 2 bit 0
1 User control word 2 bit 1
... ...
15 User control word 2 bit 15 User-defined bit.
0000h...FFFFh
06.116 LSU drive status
word 1
Bit Name
0 Enabled
1 Inhibited
2 Operation
allowed
3 Ready to start 1 = Drive is ready to receive a start command
4 Running
5 Started
6 Modulating
7 Limiting
8 Local control
9 Network
control
10 Ext1 active
11 Ext2 active
12 Charging relay 1 = Charging relay is closed
13 MCB relay
14...15 Reserved
0000h...FFFFh
Description
User-defined control word 2.
Description
User-defined bit.
User-defined bit.
...
User-defined control word 2.
(Only visible when IGBT supply unit control activated by
95.20)
Drive status word 1 received from the supply unit.
See also section Control of a supply unit (LSU)
and parameter group 60 DDCS
This parameter is read-only.
Description
1 = Run enable and start enable signals are present
1 = Start inhibited
1 = Drive is ready to operate
1 = Drive is ready to follow given reference
1 = Drive has been started
1 = Drive is modulating (output stage is being controlled)
1 = Any operating limit is active
1 = Drive is in local control
1 = Drive is in network control
1 = Control location Ext1 active
1 = Control location Ext2 active
1 = MCB relay is closed
Drive status word 1.
Parameters 179
(page 77),
communication.
Def/FbEq16
-
1 = 1
-
1 = 1