Operating The Setting And Display Unit; Setting Display Unit Appearance - Mitsubishi Electric 700 Series Training Manual

1. Operating the Setting and Display Unit

1. Operating the Setting and Display Unit
This explains the functions common to the screens.

1.1 Setting Display Unit Appearance

An LCD display is used for the screen displays.
Operations such as screen transition and data setting are carried out with the NC keyboard.
The setting display unit is configured of the LCD display, various keys and menu keys as shown below.
The drawing below shows a horizontal layout of the LCD display and NC keyboard, but these can also be
arranged vertically.
<Example for ABC layout keyboard unit>
(14) Menu keys
(4) Menu changeover keys
The following keys are provided on the keyboard.
Key type
(1) Function key
(Function
selection key)
(1) Function keys
(13) RESET key
(15) Menu list key
Key
(MONITOR)
MONITOR
(SETUP)
SET UP
(EDIT)
EDIT
(DIAGN)
DIAGN
(MAINTE)
MAINTE
1.1 Setting Display Unit Appearance
(5) Data setting keys
(alphabet, numerals, symbols)
(11) Frame keys
(2) Page changeover key
(6) Particular keys
This displays the screen related to "operations".
(Refer to "2. Monitor Screens".)
This displays the screen related to "setup".
(Refer to "3. Setup Screens".)
This displays the screen related to "editing".
(Refer to "4. Edit Screens".)
This displays the screen related to "diagnosis".
(Refer to "5. Diagnosis Screens".)
This displays the screen related to "maintenance".
(Refer to "6. Maintenance Screens".)
3
(3) Previous screen display key
(Part system changeover)
(6) Particular keys
(8) Lower case input key
(16) Operation keys
(7) Data correction keys
(9) SHIFT key
(12) INPUT key
(10) Cursor keys
Operation